With years manufacturing experience, we have solved many unique design and engineering challenges,making us well known as technology manufacturing specialists. Welcome to contact us.
100+ Advanced Machines | Any Quantity Welcome | Premium Service Guaranteed
With over 100 state-of-the-art CNC machines, we deliver uncompromising quality for prototypes to mass production. No order is too small or too large - we treat every project with white-glove service.
Our inspection instruments include German Zeiss CMM, Wanhao image measuring instrument, Hitachi handheld spectrometer, Mitutoyo roughness measuring instrument, etc.
Rebornwell was full certificated by ISO9001:2015.
According to the regulations of Rebornwell, all data are managed by special personnel to ensure information security in all aspects.
We have advanced high precision equipment like Germany GROB 5 axis machine, Swiss GF Mikron 5 axis machine, China Jingdiao 5 axis machine and US Haas 4 axis machine, tolerance down to +/-0.005 mm.
CNC milling is one of the most common process methods, used in processing designs of all sizes. Raw materials will be feed into the milling center which cuts the excess away. The raw material was selected and measured to produce minimum waste, reducing production cost. Rebornwell use the latest CNC machine and controls to produce your design quick and precision. Here are our CNC milling capabilities.
Maximum depth that can be milled is 2 in. (50.8mm) from either side of part.
Typically, Rebornwell can hold a machining tolerance of +/-0.0002 in(0.005 mm) . Part features are recommended to be thicker than 0.020 in. (0.51mm) in all regions and a nominal part thickness above 0.040 in.
Sharp inside corners on a part will be radiused (rounded) as a natural result of the CNC machining process. Resulting radii will be identified on your quote.
According to the processing requirements of different parts and the special materials, the maximum processing depth of the hole can reach 350mm.
CNC Turning is a manufacturing process also called “subtraction machining” since it involves material removal. CNC turning center is equipped with tool magazine to greatly increase the number of tools that can be selected. Bars of material are held in a chuck then rotated while a tool is fed to remove material from workpieces to create the designed shape. A shown center with tooling attached is programmed to move to the bar of raw material and remove material to create the programmed result.
We offer custom CNC machining services according to your design/ drawings, in order to protect customer’s privacy, we will sign the NDA with our customers, all our suppliers have to sign NDA as well.
All materials will be inspected with professional equipment to ensure the material quality is as good as expected.
Our experienced engineering team will program your design drawings that can be CNC machined through professional software, and find out the deficiencies in time.
CNC machining is generally divided into roughing and finishing. Roughing cuts a large amount of raw materials to process the approximate outline of the product. Finishing cuts a tiny amount of material each time to ensure that the error of each dimension of the product is within the allowable range, our tolerance accuracy can reach 0.005mm.
The processed products need to undergo a comprehensive inspection to ensure that the product dimensional deviation is within the allowable range of the design drawings. And the surface of the product will be carefully polished to remove burrs. If you have special surface treatment requirements, we have our own surface treatment workshop to provide you with anodizing, powder coating, painting, electroplating, PVD and other services.
After the QC of all products is completed, they will be packaged. The inner packaging is made of anti-collision foam and filled with gaps, so as to avoid damage to the product due to shaking and impact during transportation. The outside is packed in very durable carton boxes for secondary protection.
Aluminum is the most widely used non-ferrous metal structural material in the industry. As a soft, lightweight and durable metal material, it is often used in aerospace. If you would like to know aluminum materials, please review our aluminum CNC Machining Services page.
Stainless steel has the characteristics of corrosion resistance, high temperature resistance and ultra-low temperature resistance.It has a wide range of applications and can be used to manufacture medical equipment, auto parts, industrial products, etc. Rebornwell can provide a variety of stainless steels such as 201, 202, 303, 304, 316, 4130, 4140.
Brass is an alloy of copper and zinc. It has high strength and excellent machinability and wear resistance. The surface of brass will gradually oxidize and turn black in the air, but it will form an oxide film to protect the interior. It is often used in the manufacture of precision instruments, ship parts, auto parts, medical accessories, electrical accessories, industrial products and other precision copper parts.
Copper, also known as red copper, has good electrical and thermal conductivity, ductility and corrosion resistance, and good plastic deformation. It is a metal material commonly used in the production of generator sets, power switch devices, electrical appliances, shielding covers, chemical industry, etc.
Titanium is a structural metal with light weight, high strength, good corrosion resistance and high heat resistance. Commonly used in automotive industry, aviation fasteners, turbine blades, engine parts, sports equipment, marine, environmental protection and other applications.
Magnesium is the most widely used non-ferrous metal structural material in the industry. As a soft, lightweight and durable metal material, it is often used in aerospace, automobile, machinery manufacturing, shipbuilding and industrial development. The customized aluminum products processed by Rebornwell have a wide range of appearance and color options and a complete range of surface treatments, which can meet the needs of different industries.
ABS is a thermoplastic polymer structural material with high strength, good toughness and easy processing. It is also a low-cost engineering plastic with good processing performance, strong mechanical properties, and a wide range of applications, making it an excellent choice for production parts.
Nylon（PA）. Also known as polyamide
It is the most important engineering plastic, covering almost every application field, widely used in chemical machinery, anti-corrosion equipment gear and parts blanks, transmission structural parts, household appliance parts, auto parts, etc. Learn more about Nylon 6/6 for CNC machining.
PMMA:（polymethyl methacrylate）Also known as acrylic
It has the characteristics of good transparency, chemical stability and weather resistance, easy dyeing, easy processing, good plasticity and beautiful appearance. It is widely used in medical, industry, automobile and other fields. However, its thin-walled areas are fragile during machining, so it is not recommended for delicate or complex geometries. Learn more about Acrylic CNC Machining.
Polycarbonate, referred to as PC engineering plastics, an amorphous thermoplastic resin with excellent comprehensive properties, an engineering plastic with excellent electrical insulation, ductility, dimensional stability and chemical resistance, high strength and weather resistance. Learn more about Polycarbonate CNC machining.
PEEK (poly-ether-ether-ketones) is a high-performance specialty engineering plastic that is an excellent lightweight alternative to most soft metals. It has excellent mechanical properties, good self-lubrication, chemical resistance, and good wear resistance. Commonly used in aerospace, automobile manufacturing, electrical and electronic, medical, and other fields. Learn more about PEEK CNC machining.
POM (polyformaldehyde) is an engineering plastic with high hardness, high rigidity and high wear resistance. It has good surface hardness and compactness, and is suitable for gears, bearings, auto parts, machine tools, instrument internals and other products that play a skeleton role. Learn more about POM CNC Machining.
It is one of the lightest varieties of all plastics at present; it has the characteristics of high heat resistance, good mechanical properties, environmental protection and non-toxicity. It is suitable for making general mechanical parts, corrosion-resistant parts and insulating parts. Learn more about Polypropylene CNC Machining.
Commonly known as "Plastic King", it has excellent properties such as high and low temperature resistance, chemical corrosion resistance, small friction coefficient, self-lubrication and non-stickiness. Widely used in aerospace, electronics, electrical, chemical, machinery and other industries. Learn more about PTFE CNC machining.
Equipment Parts
Equipment Parts
Equipment Parts
Equipment Parts
Measuring Equipment
Medical Surgical Forceps
Chamber Type
Aluminum Alloy Side Buttons
Aluminum Alloy Camera Decorative Parts
Rebornwell has its own oxidation plant and is a specialist in anodized aluminium, magnesium and titanium. Anodizing not only provides a beautiful appearance color, but also increases the hardness and durability of the workpiece, and in some cases, it’s a more ideal finish than painting.
Sandblasting sprays fine sand to the workpiece through high-pressure airflow, which can form a unique texture while removing burrs and stains on the surface of the workpiece. Sandblasting can be used as a final treatment, or be prepared for subsequent surface treatment to increase the bond strength between the workpiece and the coating/plating.
Rebornwell has specific painting equipment, which can spray the product from any direction. Thousands of colors can be prepared by experienced sprayers, and the surface effect can be selected from matte, semi-gloss and full-gloss finishes, ensuring that the spraying quality can satisfy customers’ requirements.
Use professional equipment to spray electrostatic powder on the surface of the workpiece to form a uniform coating with different effects. Rebornwell always insists on protecting the ecological environment, and carries out environmentally friendly production on powder coating, so that the entire production process can reach a pollution-free state.
PVD is an environmentally friendly process. The plated film has the characteristics of high hardness, wear resistance, corrosion resistance, high chemical stability and long life. It can be plated with various film colors and finishes, which greatly improves the appearance of the workpiece.
This process can obtain a uniform and smooth paint film on the inner layer, depression, welding seam and other parts of each component, which solves the problem of painting complex-shaped workpieces by other painting methods, and the product has a long-lasting bright color and works well on corrosion resistance.
Electroplating includes vacuum electroplating, UV electroplating, plastic electroplating, and metal electroplating; its technology is widely used, suitable for mass production, and is easier to mechanize and automate production.
Passivation has the characteristics of not increasing the thickness of the workpiece and changing the color, improving the precision of the product and the anti-corrosion ability of the metal, and also maintaining the characteristics of the metal surface and increasing its added value.
The marked logo and pattern of Rebornwell’s laser engraving have outstanding features such as exquisite, clear, beautiful, and permanent, and will not fade or wear due to touch, temperature, etc. Laser engraving can engrave complex patterns and images on metal and non-metal materials.
Rebornwell’s silkscreen printing can be freely adjusted with various inks and coatings, so that the silk printing pattern can achieve a colorful, bright and strong three-dimensional effect. And the printing method can be used in various materials and shapes.
Our improved algorithm reduces CNC machining quote time by 90%, with most quotes delivered within 24 hours, depending on project details. Your customer support partner will contact you directly with your CNC machining quote to ensure
What is CNC machining?
How does CNC machining work?
What are the benefits of CNC machining?
What are your tolerances for machined parts?
What industries use CNC machining?
How does Rebornwell ensure the quality of my parts?
How much does your CNC machining service cost?
Can CNC machining be used for both prototyping and production?
How do you select cnc machining manufacturer for my parts?
What is the difference between 3 axis and 5 axis machining?
CNC machining is a widely used and effective method for producing high-quality parts. Nonetheless, it is essential for manufacturers and buyers alike to prioritize optimizing the process.
CNC (Computer Numerical Control) machining is revolutionizing the manufacturing industry due to its precision, speed, and efficiency. With advanced design software, CNC machines can produce outputs that manual machines cannot replicate.
CNC machining is an essential manufacturing process that requires precision and accuracy to achieve the desired outcome. One of the critical factors that affect the quality of CNC machining is the choice of materials used.
